文章來源： 作者：羅茨機電 發布時間：2022-07-21 瀏覽次數：200
Sewage treatment blower is an indispensable part of urban pollution control. Water is inevitably used in people's life, industrial production and machinery manufacturing.
Especially in industrial production, it is often seen in the news that the sewage discharge from a certain factory poses a great threat to the health of surrounding residents, and it is difficult to control. Its characteristics are greater pollution and wider pollution range.
Therefore, according to the publication of the article on pollution control advocated by the state, many places and regions have sewage treatment systems, in which high-pressure blowers need to be used for aeration and oxygen delivery.
Especially in some supporting facilities of environmental protection engineering equipment, we can often see the shadow of high-pressure blowers, which constantly blow air.
The main function of high-pressure blower in sewage treatment is to aerate the water to improve the oxygen content in the water, so as to remove iron, manganese or promote aerobic microorganisms to degrade organic matter, so as to achieve the purpose of removing oxidizable substances;
In addition, aeration can make water and air fully contact to exchange gaseous substances and remove volatile substances in water, such as removing the odor of water or harmful gases such as carbon dioxide and hydrogen sulfide;
It can also aerate the bottom sediment through the air inlet and blast at the bottom, and discharge it through the waste water pump. The effect and purpose are various.
When using the high-pressure blower for aeration, it is necessary to install a filter at the inlet to purify the air and prevent foreign matters from entering the fan to wear the impeller.
In the sewage treatment system, the commonly used fans include but are not limited to high-pressure blowers, roots blowers, rotary fans, etc.
Generally, for small and medium-sized areas, more high-pressure blowers are used, and for large areas, more roots blowers are used.
Another advantage is that the high-pressure blower does not need maintenance and lubrication. So it saves workers' time.
In terms of cost, it can save one-third or even half of the procurement cost.
The above is a detailed introduction about Gansu rotary fan manufacturers, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.makemoore.com