文章來源： 作者：羅茨機電 發布時間：2022-04-16 瀏覽次數：777
Roots blower is mainly composed of five parts: casing, wallboard, impeller, oil tank and muffler. It has simple structure and is convenient for future use and maintenance. This is also one of the advantages of Roots blower.
The application of Roots blower is very flexible. The outlet pressure of the blower is adjustable. Because the pressure is adjustable, it can adapt to various operating environments. It is also widely used in many industries. It can not only be used for aquaculture oxygenation, sewage treatment and aeration, but also play an important role in cement transportation and other industries. What are the characteristics of the blower? Equipment capable of controlling noise. Some equipment have large vibration and are easy to produce large noise. However, the roots blower has some improvements. The blower has small vibration and low noise. Roots blower is a kind of equipment with stable performance, which is liked by more and more people. The equipment is flexible after use for a period of time, but it is easy to wear after use for a period of time. However, due to no wear of Roots blower impeller, the blower has long performance, stable service performance and long service life.
Can the outlet pressure of Roots blower be adjusted? What is the pressure range of Roots blower?
The inlet negative pressure of Roots blower is high, which does not affect the outlet pressure. Generally speaking, in many cases, the inlet and outlet of Roots blower are directly connected to the pipeline. In some cases, there is a certain pressure at the fan inlet, which is related to the pressure of the rear gas. As long as the pressure is not too large, this pressure will not have too much impact on the fan. If the inlet pressure is too high, the fan will not work properly. The pressure of Roots blower is also the reason for the pressure rise. The outlet pressure minus the inlet pressure is the boost required by the blower. Generally, the inlet pressure shall be controlled above 40kpa, and the pressure rise shall not exceed 240kpa. Roots blower can be used satisfactorily.
Roots blower is mainly used to lead the wind from the blower to the air outlet to dry the electroplating products, so as to make the production process faster and improve the product quality. It is mainly suitable for continuous electroplating and suspension electroplating.
1. Roots blower adopts three blade rotor planning method, with reasonable ventilation inlet and outlet scheme, low vibration and low noise.
2. According to the overall planning of the impeller and shaft of Roots blower, the impeller has no wear, is more durable than the annular fan and has a long continuous working time.
3. Roots fan has higher volume utilization, higher volume efficiency and more compact scheme than ring fan.
4. The bearing selection of Roots blower is more reasonable than that of annular blower and its service life is longer.
5. Roots blower is more widely used than ring blower.
6. Roots blower is more energy-saving, energy-saving and environment-friendly than ring blower.
Roots blower is characterized by adjustable pressure within the allowable range, small flow fluctuation and wide pressure selection range. It can forcibly transport gas.
The above is the detailed introduction of Gansu rotary fan manufacturers. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.makemoore.com