文章來源： 作者：羅茨機電 發布時間：2022-03-11 瀏覽次數：742
What are the reasons for the insufficient air volume of Roots blower?
Clogged filter at the inlet of Roots blower: the filter is contained in the silencer at the inlet of Roots blower, which has the effect of filtering impurities in the air. Over time, too many impurities accumulate inside, and the air volume will be reduced if the inlet is blocked. Therefore, we need to clean the inlet filter regularly to keep the air inlet smooth.
Belt slip: the best quality belt also has a service life. The belt should be replaced in time after a long time. In addition, the V-belt should be adjusted at intervals during use. If the belt is loose, it will regret slipping or insufficient air volume of the fan.
Pipeline air leakage: Roots blower belongs to pipeline fan, which transports gas through pipeline. If the pipeline is damaged and the gas runs into the air, there will be insufficient air volume. Therefore, at ordinary times, the on-site staff should do a good job of inspection in time. If the pipeline is damaged or air leakage, it should be repaired in time.
The pipe is too long: the pipe is too long and the pressure is insufficient, which will also lead to insufficient air volume. At this time, the pipe needs to be reset.
Pipe blockage: during the operation of Roots blower, we can't guarantee that the pipe is connected at all times. If the pipe is blocked for some reasons, it will lead to high pressure. At this time, the air volume will be unstable, resulting in too high or too low instantaneous air volume. If this happens, we must stop the machine in time for inspection.
The above is the detailed introduction of Shanxi roots blower manufacturer, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.makemoore.com