文章來源： 作者：羅茨機電 發布時間：2022-02-18 瀏覽次數：787
The gearbox of Roots blower can not be flooded, especially the normal operation of Roots blower. Once flooded, it is likely to lead to the invalidation of lubricating grease and the destruction of transmission gear. If the gearbox of Roots blower suddenly enters water, how to deal with it? Let's follow Xiaobian to understand.
The cooling circulating water pipe is cracked, causing water to enter the oil tank. Under such conditions, park the vehicle immediately and do not work again. If the cooling circulating water pipe is damaged, this kind of situation is very serious. After parking, dismantle the oil tank and check the transmission gear of the fan to see if there is damage.
In this kind of situation, only after disassembly and maintenance, repair the water-cooling heat pipe, go through testing, and check whether the fan is working normally during reassembly.
2. The idle fan oil tank has water inflow. If the idle fan has water inflow into the fan gear box due to human factors, the oil drain inlet at the bottom of the oil tank can be opened to drain the grease and water inside neatly. Then place it for a few days to let the water inside evaporate, and then wash it with grease. After the grease is introduced into the oil tank, turn the belt pulley, Test run to see the actual effect. If there are problems, park the car immediately.
This article is provided by Shanxi roots blower manufacturer. Our website is: http://www.makemoore.com We will provide you with services with wholehearted enthusiasm. Welcome to visit