離心風機在我們的生活中應用的范圍非常廣泛，而隨著社會的發展和經濟的變化，離心風機在各行各業的應用也逐漸多了起來，而隨著離心風機的應用越來越廣泛，很多朋友反映離心風機出現磨損的情況，那么想要解決磨損的情況，首先我們需要了解它磨損的原因，才能找到解決風機磨損的措施，下面咱們就跟陜西離心式風機廠家一起來了解一下離心風機的磨損的原因及處理措施!

Centrifugal fan is widely used in our life. With the development of society and the change of economy, the application of centrifugal fan in all walks of life has gradually increased. With the application of centrifugal fan becoming more and more widely, many friends reflect the wear of centrifugal fan. In order to solve the wear problem, first of all, we need to understand the reasons for its wear In order to find the measures to solve the problem of fan wear, let's work with Shaanxi centrifugal fan manufacturers to understand the causes of centrifugal fan wear and treatment measures!

1、原因

1. Why

(1)經營情況不合理

(1) Unreasonable operation

離心風機具有防止系統磨損、結構、功能的功能。這改變了風扇馬達、轉子、刀片的運行狀態，改變了風扇的內部結構，改變了卡車，進行空氣移動偏移和移動，使風扇的磨損更加嚴重。長期駕駛，高負荷下電風扇的磨損增強了。

The centrifugal fan has the function of preventing system wear, structure and function. This changes the running state of the fan motor, rotor and blade, changes the internal structure of the fan, changes the truck, and makes the air move, offset and move, which makes the wear of the fan more serious. Long term driving, the wear of the electric fan under high load is enhanced.

(2)速度太快

(2) It's too fast

運行速度是造成風機磨損的另一個重要原因，根據風機磨損的數據分析，磨損程度與風機運行速度呈正相關，風機運行速度加倍，風機磨損三倍，風機磨損普遍，風機運行速度的平方為支柱。

Running speed is another important cause of fan wear. According to the data analysis of fan wear, the degree of wear is positively correlated with the running speed of the fan. The running speed of the fan is doubled, the fan wear is three times, the fan wear is common, and the square of the running speed of the fan is the pillar.

(3)化工廠選用的風機出了差錯

(3) The fan selected by the chemical plant has gone wrong

位置不同，功能設置不同。為了適應不同的設計狀態，設計與實際的間隙、功能和需要的差異形成了風機選型問題。風扇過載工作和風扇磨損容易形成問題。

Different location, different function settings. In order to adapt to different design state, the gap between design and actual, function and need difference form the problem of fan selection. Fan overload work and fan wear easily cause problems.

(4)對除塵風機的磨損

(4) Abrasion of dust removal fan

在化工廠使用時，由于長期積累，工作中的大量粉塵會對風軸承、葉片和電機造成損壞。由于粉塵粒徑小，種類多，許多粉塵不能有效清除，容易在風機的易碎部位形成傷口。

When used in chemical plant, a large amount of dust will damage the wind bearing, blade and motor due to long-term accumulation. Due to the small particle size and many kinds of dust, many dust can not be effectively removed, and it is easy to form a wound in the fragile part of the fan.

2、處理措施

2. Treatment measures

先要先大體檢查一下離心風機外殼有沒有什么問題，然后檢查一下引風機的電機方面，看看軸承箱中的油的質量是否合格，有沒有達到標準。之后在看一看潤滑系統冷卻器的供水方面是否有問題，其次檢查一下潤滑油的往返油箱是否有阻礙。

First of all, we need to roughly check whether there is any problem with the shell of the centrifugal fan, and then check the motor of the induced draft fan to see whether the quality of the oil in the bearing box is qualified and whether it meets the standard. After that, check whether there is any problem in the water supply of the cooler of the lubrication system, and then check whether there is any obstacle in the return of the lubricating oil to and from the oil tank.

然后檢查下電機、主機和液力耦合器的相對位置是否正確。一定要確保液力耦合器的位置要低于電機和主機。

Then check whether the relative positions of the lower motor, the main engine and the hydraulic coupler are correct. Make sure that the position of the hydraulic coupling is lower than that of the motor and the main engine.

還要檢查一下風機的盤車機構與離合器，油箱中有沒有適量的潤滑油;檢查一下周圍乃至整個引風機的螺絲的松緊問題，一定要確保每個壓緊螺栓的緊固性。其次還要看一看機殼與進氣箱、水閥等連接處是否緊固。

Also check whether there is proper amount of lubricating oil in the barring mechanism, clutch and oil tank of the fan; check the tightness of the screws around and even the whole induced draft fan, and make sure the tightness of each pressing bolt. Secondly, we need to see if the connection between the casing and the intake box, water valve, etc. is tight.

上述就是陜西離心式風機廠家整理的離心風機出現磨損的原因及處理方法，你學會了嗎!以后大家遇到風機磨損的問題，可以根據以上措施來做出相應的解決辦法!如您想要了解更多資訊內容歡迎點擊我們的網站http://www.makemoore.com。

The above is the reason and treatment of centrifugal fan wear sorted out by Shaanxi centrifugal fan manufacturers. Have you learned it? If you encounter the problem of fan wear in the future, you can make corresponding solutions according to the above measures! If you want to know more information, please click our website http://www.makemoore.com .

相關文章： 陜西離心式風機廠家 凈化器 氣力輸送設備廠家 油煙 甘肅回轉風機廠家