回轉鼓風機結構非常簡單，由風機、電機、底座、儲油箱、空氣室和空氣濾清器六部分組成?；剞D風機工作原理也比較簡單，裝在回轉風機內的偏心裝置在氣缸體內旋轉，安裝在轉子槽內的4個滑片產生往復運動，從而將空氣吸進、壓縮、排出。但是有些客戶可能會有困擾，比如回轉風機滴油嘴的作用是什么?回轉風機滴油嘴滴速對回轉風機運行有什么影響?濟南鼓力風機就這個問題統一回復一下，以便您對回轉風機潤滑原理和滴油嘴的相關問題有更多了解。

The structure of rotary blower is very simple, which is composed of fan, motor, base, oil storage tank, air chamber and air filter. The working principle of the rotary fan is also relatively simple. The eccentric device installed in the rotary fan rotates in the cylinder body, and the four sliding blades installed in the rotor slot produce reciprocating motion, so as to suck in, compress and discharge the air. However, some customers may have problems, such as what is the function of the oil drip nozzle of the rotary fan? What effect does the dropping speed of the oil dropping nozzle of the rotary fan have on the operation of the rotary fan? Jinan Guli fan will give a unified reply on this issue, so that you can have a better understanding of the lubrication principle of the rotary fan and the related problems of the oil drip nozzle.

回轉鼓風機運轉中，構成風機的滑片、轉子、氣缸之間有很小的間隙，高速運轉中機械體會產生磨擦，繼而產生熱量。所以回轉風機運轉時，由回轉風機滴油嘴往氣缸體內滴入必要的潤滑油，使風機內部潤滑，以減小磨擦熱和降低磨擦噪音;并使部件之間形成一層油膜，保持風機的密封性?；剞D風機的潤滑是利用風機工作時產生的壓力差而形成自動供油，因此回轉風機不能空負載運轉，一定要帶壓啟動和運行。滴油嘴將潤滑油滴入會轉風機內部，保證風機的潤滑?；剞D風機型號不同，需要的潤滑油數量也不同，大型回轉風機需要滴油速度快一些，反之，小型回轉風機需要的潤滑油則少一些，滴油嘴滴油速度調整的慢一些就滿足需要了。

During the operation of the rotary blower, there is a small gap between the sliding plate, rotor and cylinder constituting the fan. During the high-speed operation, the machinery will generate friction and then generate heat. Therefore, when the rotary fan is running, drip necessary lubricating oil into the cylinder body from the rotary fan drip nozzle to lubricate the inside of the fan, so as to reduce friction heat and friction noise; An oil film is formed between the components to maintain the tightness of the fan. The lubrication of the rotary fan is to use the pressure difference generated during the operation of the fan to form automatic oil supply. Therefore, the rotary fan cannot operate under no-load, and must be started and operated under pressure. The lubricating oil drops into the rotating fan through the oil dropping nozzle to ensure the lubrication of the fan. Different models of rotary fans require different quantities of lubricating oil. Large rotary fans need to drip oil faster. On the contrary, small rotary fans need less lubricating oil. If the drip speed of the drip nozzle is adjusted slower, it can meet the needs.

回轉鼓風機運轉過程中，輸送的空氣會含有一定的油氣，所以，空氣在排出管路前會在空氣室的油氣分離裝置中進行分離，然后排出管道，而潤滑油則通過回油管回落進入油箱。因為油氣不會被完全分離，回轉風機輸出的氣體中會含有少量的油霧，所以，選擇鼓風機時，對于空氣清潔度要求較高的工況要提前說明。

During the operation of the rotary blower, the delivered air will contain a certain amount of oil and gas. Therefore, the air will be separated in the oil and gas separation device in the air chamber before being discharged from the pipeline, and then discharged from the pipeline, while the lubricating oil will fall back into the oil tank through the oil return pipe. Because the oil and gas will not be completely separated, the gas output by the rotary fan will contain a small amount of oil mist. Therefore, when selecting the blower, the working conditions requiring high air cleanliness should be explained in advance.

以上就是為大家介紹的有關甘肅回轉風機廠家http://www.makemoore.com的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以專業的態度,為您提供服務

The above is about Gansu rotary fan manufacturer introduced to you http://www.makemoore.com I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service

相關文章： 陜西離心式風機廠家 凈化器 氣力輸送設備廠家 油煙 甘肅回轉風機廠家