下面羅茨風機廠家小編就為大家帶來羅茨風機皮帶發熱的解決方法？

The following roots blower manufacturers small series to bring you roots blower belt heating solution?

過緊的皮帶會導致皮帶發熱，而且會影響風機聯動，在動力傳輸過程中損耗，過緊的皮帶甚至有可能會在運轉過程中崩斷，所以，無論過松還是過緊都不好，因此，風機廠家們出廠時應該對風機各方面指標進行嚴格測試，確保風機運轉正常。

Too tight belt will lead to belt heating, and will affect the fan linkage, loss in the process of power transmission, too tight belt may even break in the process of operation, so, whether too loose or too tight is not good, therefore, fan manufacturers should carry out strict testing on all aspects of fan indicators when leaving the factory, to ensure the normal operation of the fan.

導致羅茨風機皮帶出現問題的原因通常是皮帶過松，這樣都會導致羅茨風機皮帶發熱。

The reason that causes the problem of Roots blower belt is that the belt is too loose, which will lead to the heating of Roots blower belt.

羅茨風機廠家在羅茨風機出廠前都應該將風機的皮帶調整到合適松緊的狀態，這樣才能保證風機運轉通暢，過松的皮帶不僅會導致發熱，而且還會出現脫落損壞的現象。

Before the roots blower leaves the factory, the manufacturer of Roots blower should adjust the belt of the blower to a proper elastic state, so as to ensure the smooth operation of the blower. Too loose belt will not only cause heat, but also cause falling off and damage.

相關文章： 陜西離心式風機廠家 凈化器 氣力輸送設備廠家 油煙 甘肅回轉風機廠家